Refresh

Monocoat Refresh restores and protects surfaces treated with Monocoat Oil Plus. Monocoat Refresh is used when the surface feels too dry or rough, or when the finish has worn off due to heavy traffic. When the color of the surface needs to be restored, we recommend a treatment with Monocoat Oil Plus, using the corresponding color of the treated surface. Refresh is just as effective when used on other oiled or varnished surfaces.

INSTRUCTIONS

1. Eliminate dirt and dust from the floor.
2. Apply Monocoat Refresh on to the surface to be treated with a cloth. Use a minimal amount of the product to prevent the floor from becoming sticky.
3. Allow the product to react for a couple of minutes.
4. Wipe dry with a cloth, paper towel, or buffer with white pad. Finish the treatment using an absorbing cloth, until the surface feels completely dry.
5. Pay attention to handle medium sized areas that can be fully wiped dry within 15 to 20 minutes.
6. The surface can be walked on after 4 to 6 hours.

COVERAGE

1 Liter = approx. 1000 sq. ft.

TECHNICAL SPECIFICATIONS

• Oil
• Unit weight: +/- 2 lb.
• Color: opaque
• Odor: specific

STORAGE

The product can be stored for up to 12 months. Store in dry conditions and in the original packaging.

PACKAGING

Available in a 400 ml spray bottle as well as 0.5 Liter and 1 Liter cans.